MarCom Active Working Groups Time Schedule - November 2008

Nr:

Working Group:

Mentor:

2003

2004

2005

2006

2007

2008

2009

2010

2011

2012

47

Criteria for the selection of Breakwater types

Burcharth

A

K

P

48

Guidelines for Port Constructions, related to Bow Thrusters

Van Damme

A

K

P

S

49

Horizontal and Vertical Dimensions of Fairways

Hunter

A

K

P

50

General principals for the design of maritime structures

Hunter

A

K

P

51

Water injection dredging

Van Damme

A

K

P

52

Criteria for the (un)loading of containerships

Hauser

A

K

P

53

Recommendations with regard to the design and construction of maritime structures in Tsunami prone areas

Katoh

A

K

P

54

Use of hydro/meteo information to optimise safe port access

Hunter

A

K

P

55

Safety aspects of berthing operations of oil and gas tankers

Lundestad

A

K

P

56

Application of geotextiles in waterfront protection

H.J. Verhagen

A

K

P

57

Stability of pattern placed revetment elements

H.J. Verhagen

A

K

P

A = WG approved by ExCom K = Kick Off Meeting P = Presentation draft Report in MarCom S = Send final report to Brussels

Annexe: - MarCom Former Working Groups and Published Reports

MarCom Former Working Groups and Published Reports: ( ) = PIANC Bulletin number

1. Underkeel clearance in muddy areas, 1983 (43)

2. The stability of breakwaters, 1985 (48)

3. Ice navigation, 1984 (46)

4. Handling of dangerous goods in ports, 1985 (49)

5. Underkeel clearance for large ship in maritime fairways with hard bottom, 1985 (51)

6. Classification of soils and rocks to be dredged, 1985 (47)

7. Dimensions and lay-out of one- and two-way channels and fairways (not published)

8. Damage inflicted by ships with terminals, 1990 (70)

9. Development of Modern Maritime Terminals, 1987 (56) (out of print)

10. The disposal of dredged materials into sea, 1986 (52)

11. Port facilities for ferries: practical guide, 1995 (87)

12. Analysis of rubble mound breakwaters, 1992 (78,79)

13. Floating breakwaters: a practical guide for design and construction, 1994 (85)

14. Economical channel maintenance methods, 1989 (67)

15. Dry docks, 1988 (63)

16. Specification quantities and related risks on marine transportation of hazardous chemicals and wastes, 1992 (78,79)

17. Inspection, maintenance and repair of maritime structures in salt water exposed to material degradation, 1990 (71); revision WG17 – 2004 (115)

18. Design of fishing ports, 1997 (97)

19. Dredged material, beneficial uses and underwater disposal, 1992 (76)

20. Capacity simulation models for approach channels and fairways in harbours, 1992 (77)

21. Flexible revetments in the marine environment, 1992 (78,79)

22. Armoured slopes under open piled quay walls, 1997 (96)

23. Site investigation requirements for dredging works, 2000 (103)

24. Movements of moored ships in harbours, 1995 (88)

25. Coastal Instrumentation, abolished

26. Marine Oil Pollution, abolished

27. Artificial Islands, abolished

28. Breakwaters with vertical and inclined concrete walls, 2003 (113)

29. Recommendations for By-Pass systems for Harbours and Sandy Coasts, abolished

30^a.Approach channels: Preliminary guidelines, 1995 (87)

30^b.Approach channels: A guide for design, 1997 (95)

31. Life cycle management of port structures, 1998 (99)

32. Port Facilities for High-Speed Ferries, abolished

33. Guidelines for the Design of Fenders Systems, 2002 (111)

34. The effect of earthquakes on port structures, 2001 (106)

35. Dangerous goods in ports, 2001 (105)

36. Catalogue of Prefabricated Elements, 2005 (121)

37. Advances in Maritime Intermodal Freight Transport, abolished

38. Ice Navigation, abolished

39. Monitoring of breakwaters, abolished

40. State-of-the-art of designing and constructing berm breakwaters, 2003 (113)

41. High speed ferries at sea and port approaches, 2003 (114)

44. Accelerated Low Water Corrosion, 2005 (121)

102. Minimising Habour Siltation, Oct. 2008 (133)

103. Life Cycle Management of Port Structures – Recommended Practice for Implementation, Oct. 2008 (133)